Deos Maple Full Functionality
This release provides the Maple_Program with full functionality distribution.
Description
The candidate distribution is at:
smb:\\scorebuild.ddci.com\DDCI_integration\DDS-maple-deos-fourpeaks-20140121
The setup.ini is at:
smb:\\scorebuild.ddci.com\DDCI_integration\DDS-maple-deos-fourpeaks-20140121\deos-heartos-posix
| Customer | Distribution | AFDX | BSPs | CFFS | 653p1 | 653p4 | TDL | Stable Date | Ship Date | Remarks |
|---|---|---|---|---|---|---|---|---|---|---|
| Maple | Fourpeaks | No | Yes | Yes | No | No | No | 2014-Jan-20 | 2014-Jan-23 | Uploaded to customer via secure FTP site. |
GAP Analysis
In order to bound the amount of testing needed for this release, engineering judgement was applied such that only new or changed software components were tested.
A difference (gap) analysis was performed on a previous release, which was DDS-chino-deos-fourpeaks-20131119. The gap analysis results showed that the only relevant differences were to the packages described in the Components section below.
Components to Work
Components
Below are the Deos components being worked for this release. See also the list of FTP server symbolic links.
| Component | Version | Phase | CCB | OA | TRAC | Fourpeaks | Who | Remarks |
|---|---|---|---|---|---|---|---|---|
| maple-boot | 1.1.0 | Stable | Yes | OpenArbor_5.2.0 | N/A | Yes | MD | Test Report |
| maple-configuration | 2.0.0 | Stable | Yes | OpenArbor_5.2.0 | N/A | Yes | MD | Test Report |
| maple-pal | 2.0.0 | Stable | Yes | OpenArbor_5.2.0 | N/A | Yes | MD | Test Report |
| cffs-server | 6.0.2 | Stable | Yes | OpenArbor_5.2.0 | N/A | Yes | N/A | Test Report |
| cffsmpc5200ata | 1.0.0 | Stable | Yes | OpenArbor_5.2.0 | N/A | Yes | MD | Test Report |
| cffs-examples | 3.0.1 | Stable | Yes | OpenArbor_5.2.0 | N/A | Yes | MD | Test Report |
| fec-earnhardt | 1.1.0 | Stable | Yes | OpenArbor_5.2.0 | N/A | Yes | MD | Test Report |
Legend
CCB : A release CCB has been held.
Phases Are:
- Hold - on hold
- Dev - in development
- Build - can be built from HEAD
- Test - Component released and ready to test.
- Stable - You are done! All steps (including test report) in the software release howto have been followed.
OA: All components should be tested using the OpenArbor listed in the table above. Otherwise this column should contain an N/A indicating that it doesn't need to be tested, in an integrated fashion, with OpenArbor.
TRAC: All components should be tested using Build 254. Otherwise this column should contain an N/A indicating that it doesn't need to be tested, in an integrated fashion, with TRAC.
The Distribution Columns:
- Yes or no : component tested for that distribution
- version that was frozen for that distribution
Who Is the person responsible for doing the work associated with the component.
Remarks are free form text. It must contain the test report when done.
Addiitonal Ad-Hoc Testing
In addition to the testing described in the Components table above, the following was performed:
- Using DDS-maple-deos-fourpeaks-20140121, the customer hardware platforms DeosMaple1 and DeosMaple2 were re-flashed per the steps used by the customer to program these platforms. The boards were then powered up observed to boot Deos and "ping" on the network.
- Again, using a fresh DDS-maple-deos-fourpeaks-20140121 install, the cffsbenchmark and hello-world examples were downloaded and executed on DeosMaple1. Both ran successfully, and their resulting behavior was as expected for this release.
Removed Components
Relative to prior Maple releases: None.
Test Summary
All components performed as exepcted.
All tests achieved desired results.
Known Problems
None
